AE-182L
AE-182L Ultra-high Speed and High Accuracy DC resistance checker corresponding to fine
Corresponding to ultra-fine resistors such as 03015 and 0201 and optimal for sorting machine and taping machine of D,F,G,J,K class resistance, inductor and RDC measurement of the thermistor
New function
- New reliability improving method: contact-check function during the measurement
- Help to improve yield by the retry function during the measurement
- To achieve an about 2~2.7 times speedup while keeping the accuracy and substantially accelerating measurement speed for both low and high resistance area
- Possible to manage measurement data by attached application（for Wｉｎｄｏｗｓ）(Data can be saved in CSV)
- LAN interface as an option
- Bar code（QR code）interface as option
Characteristic
- Corresponding to ultra-fine chip resistor（measurement power is less than 0.02W/ the release voltages between measurement terminals is below 8V）
- Super high speed（As representative value , from START to EOC is only 0.9msec according to actual measurement）
- Realize high accuracy and stable measurement by canceling thermo electromotive force
- Realize ultra high-speed ・high-stable measurement by the function of setting integral time for each range
- ％measurement：-99.99%〜+25.00％【STANDARD setting range:5mΩ～109MΩ】
- Absolute value setting：0.00mΩ～125.00MΩ/li>
- Contact check：available to select before measurement/after measurement/OFF（Always monitor the contact statement during measurement in each statement）
- Equipped with contact-cleaning as standard function
- Equipped with RS-232C interface as standard function (GP-IB/LAN/bar code is an option)
- Equipped with printout as standard function（Centronics conformity）
- Transfer function for setting data is equipped as standard （Available to automatically set and transfer the same setting data to another AE-182L,AE-162E）
- Equipped with check abnormalities function for measurement current/measurement voltage
